UPC-E1
Most U.P.C. bar codes lead with the 0 number system. For these codes, use
UPC-E0
(page 7-26). If you need to read codes that lead with the 1 number
system, use the UPC-E1 On selection. Default = Off.
UPC-E1 On
EAN/JAN-13
EAN/JAN-13 On/Off
* On
EAN/JAN-13 Check Digit
This selection allows you to specify whether the check digit should be
transmitted at the end of the scanned data or not. Default = On.
* On
<Default All EAN/JAN Settings>
* UPC-E1 Off
Off
Off
7 - 29