Good Read Delay; User-Specified Good Read Delay; Manual/Serial Trigger Modes; Manual Trigger - Honeywell 1900GSR-2 User Manual

Good Read Delay

This sets the minimum amount of time before the scanner can read another
bar code. Default = 0 ms (No Delay).
* No Delay
Short Delay (500 ms)
Medium Delay (1,000 ms)
Long Delay (1,500 ms)

User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar
code below, then set the delay (from 0-30,000 milliseconds) by scanning
digits from the inside back cover, then scanning Save.
User-Specified Good Read Delay

Manual/Serial Trigger Modes

Manual Trigger

When in manual trigger mode, the scanner scans until a bar code is read,
or until the trigger is released. Two modes are available, Normal and
Enhanced. Normal mode offers good scan speed and the longest work-
ing ranges (depth of field). Enhanced mode will give you the highest possi-
4 - 6