DIMMs
The system board contains four DIMM sockets labeled 1 through 4. Each socket
can hold a single 72-bit DIMM module with 64MB, 128MB, 256MB, 512MB,
or 1GB of memory. When all four sockets are populated, the system board
supports a maximum of 4 GB of memory with 1GB DIMMs. A DIMM will
always be installed in socket 1. When you install additional DIMMs, you must
start with the first empty socket next to the DIMMs already installed. When you
remove DIMMs, you must start with the highest number occupied DIMM socket
on the system board.
DIMM Locations
Upgrading Your System 4-11