Problems with the Network
Diagnostics pass, but the connection fails:
Make sure the network cable is securely attached.
!
The controller stopped working when an add-in adapter was installed:
Make sure the cable is connected to the port from the onboard network controller.
!
Make sure the other adapter supports shared interrupts. Also, make sure your
!
operating system supports shared interrupts; OS/2 does not.
Try reseating the add-in adapter.
!
The add-in adapter stopped working without apparent cause.
Try reseating the adapter first; then try a different slot if necessary.
!
The network driver files may be corrupt or deleted. Delete and then reinstall the
!
drivers.
Run the diagnostics.
!
Problem Solving 5-13