Pop-Up Menus - NEC Express5800/120Mc2 User Manual

Pop-Up Menus

Clicking the right mouse button in a server window displays a Pop-up menu.
From this menu, you can execute main commands on the current server.
Connect command — connects the current server to the management
!
PC. Once the server has been connected, [Connected] is displayed in the
title bar and the server screen displays in the server window.
Disconnect command — closes the connection to a current server. Once
!
the server has been disconnected, [Not Connected] is displayed in the
title bar.
Change Remote Drive command — temporarily changes the remote
!
drive of a current server. This command can be executed only when a
remote drive is in use. Set the necessary information in the Temporary
Change to Remote Drive dialog box. This command does not update the
server properties. The setting becomes invalid when the server is
disconnected.
Pause POST command — pauses the server in the middle of POST
!
when the current server is executing POST. To resume POST, select the
Go to End of POST command, then select Go (MWA mode) command,
or the Go (No MWA mode) command.
Go to End of POST command — pauses the server at the end of POST
!
when the current server is executing POST. To resume booting, select
the Go (MWA mode) command or the Go (No MWA mode) command.
Go (MWA mode) command — When the Go (MWA mode) command
!
is selected when POST is paused, the server resumes POST and executes
booting in MWA mode.
Go (No MWA mode) command — If the Go (No MWA mode)
!
command is selected when POST is paused, the server resumes POST
and executes booting in No MWA mode.
Restore Final Screen command — displays the remote console screen
!
as it appeared immediately before the server was disconnected. This
command becomes valid after the server is disconnected.
Clear Screen command — clears the remote console display. This
!
command becomes valid after the server is disconnected.
Server Summary Pop-up menu — Position the cursor on a server
!
record in the Server Summary dialog box and click the right button to
display the Server Summary Pop-up menu. From this menu, can execute
main commands on the server.
Management Workstation Application B-11