Using Arcsoft Mediaconverter 3 For Casio Projector - Casio XJ-H1750 Function Manual

4.
Select the ECA file or PtG file you want to play back and then click the [Open]
button.
This will display a control panel at the top of the screen.
During file playback, you can use the control panel buttons to perform the operations
described below.
To do this:
Go to the previous page
Go to the next page
Jump to a specific page
Display help
Exit file playback

Using ArcSoft MediaConverter 3 for CASIO Projector

ArcSoft MediaConverter 3 for CASIO Projector is computer software that converts an MP4, MOV
AVI, or WMV format file to a Motion JPEG format AVI file that can be played by the projector's Viewer
function. For details about file formats, see page 5.
* QuickTime Player 7 or greater is required to convert from a MOV file.
Important!
In order to perform the procedures in this section, you will first need to install ArcSoft
MediaConverter 3 for CASIO Projector onto your computer. For more information, see "Installing
the Software" (page 8).
Click the button.
Click the button.
1. Click the button and then click "Slide Viewer" on the menu that appears.
2. On the page menu that appears, click the thumbnail of the destination page
and then click [OK].
Click the button and then click "Help" on the menu that appears.
Click the button, or click the
that appears. You could also press the [ESC] button on your computer keyboard
to stop playback.
17
Control panel
Perform this operation:
button and then click "Exit" on the menu
*
,