Casio XJ-H1750 Function Manual page 15

6.
Select the PowerPoint file you want to convert from and then click the [Open]
button.
This will display a dialog box like the one shown below for specifying the file settings.
7.
Configure the settings as required on the dialog box.
The following describes the meanings and settings of each of the items that appear on the
dialog box.
Dialog Box Item
Input File
Output Drive
Output File Name
ECA/PtG
8.
After configuring all the settings you want, click [OK].
This will start playback of the PowerPoint file and start converting it to an ECA file or PtG file.
The "Conversion complete." message will appear when file conversion is complete.
If you have other PowerPoint files you want to convert, repeat steps 4 through 7.
To check the contents of an ECA file or PtG file, perform the procedure under "To play back
an ECA file or PtG file on your computer" (page 16).
9.
After you are finished converting all the files you want, click the close button in
the upper right corner of the EZ-Converter FA window.
Shows the name of the PowerPoint file selected in step 6. The setting of this item
cannot be changed.
Shows the drive name of the removable disk (USB memory or memory card) connected
to the computer in step 2. When you have multiple removable disks connected to your
computer, you can click the [ ] button and select the name of the drive where you
want to save the converted file. A converted file is stored in the folder named ECA (in
the case of an ECA file) or PtG (in the case of a PtG file) on the drive you specify here.
Under initial default settings, if there are no removable disks connected to the
computer, the resulting file will be saved in the same location (drive and folder) as the
original PowerPoint file. Click the [Browse] button and change the save destination, if
you want.
Shows the file name of the converted file, along with the path from the drive name.
Except for the extension, the file name is the same as the PowerPoint file name. The
setting of this item cannot be changed.
Specifies the format of the converted file (Default: ECA).
For details about ECA and PtG files, see "About the Data Projector's USB Functions"
(page 5) of this manual.
Description
15