Epson STYLUS PRO 9000 User Manual page 28

Paper thickness test pattern example:
1 2
6. See the printed pattern to determine which set of lines are
aligned (show the smallest gap), and note the corresponding
number.
7. You may see
to select the number noted in step 5.
Note:
The default value depends on the PAPER THICK. value in the Head
Alignment menu and is displayed as a PAPER THICK. NO. in the
Paper Configuration menu as shown below:
PAPER THICK. value
0.0 mm
to
1.6 mm
8. Press the Item button.
button to select time in minutes.
9. Press the Pause button to exit the SelecType mode.
Selecting the registered settings
To select the registered settings, follow the steps below.
1. In the SelecType mode, press the SelecType button until
2. Press the Item button. You may see
3 4 5 6 7
smallest gap
appears on the LCD panel.
8 9 10 11 12
. Press the + or - button
PAPER THICK. NO.
1
to
17
appears. Press the + or -
13 14 15 16
.
The Control Panel
17
28