Epson STYLUS PRO 9000 User Manual page 17

1. Enter the SelecType mode
Make sure that
press the SelecType button.
The first menu,
2. Select a menu
Press the SelecType button to select a desired menu.
For example:
To return to the READY status, press the Pause button.
3. Select an item
Press the Item button. The first item of the selected menu is
displayed. Press the Item button to select a desired item.
For example:
parameter is the default value.)
If the item is for execution only, press the Enter button to
execute the function for the item. After execution, the printer
exits SelecType mode and returns to the READY status.
For example:
panel settings to the factory-set values.)
4. Select a parameter
Press the + or - button to select a parameter for the item.
For example:
disappears. This means that the selected parameter (OFF) is
not yet stored as the default value.
To display the next item without changing the default value,
press the Item button.
5. Set the parameter
Press the Enter button to store the selected parameter as the
default value.
For example:
Press the Item button to return to step 3 if you want to select
another item.
is displayed on the LCD panel, then
( shows that the displayed
(Initializes the current
. Note that the asterisk
is displayed.
is displayed.
The Control Panel
17