Using Digital Zoom; Figure 2-9 Ptz Window; Figure 2-10 Example Of The Digital Zoom - Honeywell HREP16 User Manual

Using Digital Zoom

Document 800-06847 Rev B
08/10
Figure 2-9 PTZ Window
2. Select the camera by channel.
3. Use the arrow buttons to reposition the PTZ camera field of view.
4. Use ZOOM, FOCUS, and IRIS to change the current camera view.
5. Click PARAMETER to configure PTZ camera parameters.
See Table 2-1 on page 23
PTZ cameras.
When viewing a channel in full screen, you can use your HREP8 or HREP16 to zoom in to
a particular area by up to 8 times. The HREP4 supports 2 times digital zoom without a small
picture-in-picture window.
Select the desired channel, then navigate to ZOOM
click .
Figure 2-10 Example of the Digital Zoom
HREP Color Digital Video Recorder User Guide
Select the camera channel
for descriptions of front panel and remote controller controls for
on the control bar, and then
Click here to escape
Zoom mode.
This small window shows the
full image. For HREP8 and
HREP16, the main display area
shows the zoomed portion.
Use these arrows to move
the zoomed area.
31