Figure 2-54 Buzzer Out Setup Menu - Honeywell HREP16 User Manual

Document 800-06847 Rev B
08/10
Figure 2-54 BUZZER OUT Setup Menu
These settings determine the behavior and actions that will trigger the internal buzzer.
2. Configure the following behavior settings:
OPERATION Enable/disable the internal buzzer.
HDD EVENT Determines whether a hard drive event triggers the buzzer.
MODE Select from TRANSPARENT (the buzzer sounds only when the
trigger criteria are present) or LATCHED (the buzzer sounds for
a set period of time after a trigger).
DURATION In LATCHED mode, this is the time that the alarm output
remains active after it has been triggered.
3. Configure the action settings:
ALARM Configure whether the alarm inputs trigger the buzzer.
VIDEO LOSS Configure whether video loss on any of the selected channels
triggers the buzzer.
MOTION Configure whether motion detection on any of the selected
channel triggers the buzzer.
Note Remember to select APPLY and click
these menus.
Configuring E-Mail Notification
1. Click E-MAIL NOTIFICATION on the left side of the EVENT/SENSOR window.
The E-MAIL NOTIFICATION setup menu appears.
HREP Color Digital Video Recorder User Guide
to save all settings before exiting
61