Panasonic EASA-PHONE KX-T123210 Installation Manual page 195

Use of Other Features
Description
Allow you to dial to the extension on which
is set the Do Not Disturb.
This feature is required to be set beforehand
in the KX-Tl23210. For programming, see
page 3-74.
Lift
handset
@Jo* .
.
q
. . . . . .
rl
Ring back
tone is heard
and wait
for answer
/..F:inJ
Dial
Do not Dial "1"
extension disturb tone
number is heard
7:; through
Description
"Voice alerting" (through built-in speaker)
that is established at the called party's
extension, can be switched to "Tone alerting"
(ringing).
l This feature is required to be set
beforehand at the called partys extension.
For programing, see page 4-56.
l A rotary phone will not function.
Operation
Switching to Tone Alerting
Wait until a
confirmation'
tone is heard
Press "3~" Ring back
tone
l You should press "# button within 10
seconds after the dialing.
Description
Allows extension user to access features of
the central office or host PBX. (example:
call waiting feature can be supplied by the
central office.)
0
0
The external feature (call waiting) can
only be accessed when engaged on an
outside call.
The following example shows you one of
the procedures.
Operation
Call Waiting-Outside Line
While in Will hear a
Flash Dial "6"
conversation
call waiting
hookswitch
tone
Consult with Flash Dial "6" Consult with
new caller hookswitch original caller while
while original 2nd call is
call is placed placed on hold
on hold
is terminated.
l Flashing the hookswitch and dialing "6"
means flash operation.
l
If the KX-T123210 is connected to a host
PBX and a flash operation is required,
follow the procedure of flash operation
which is required for the host PBX.
When the "Call on Hold for Standard
Telephone" on page 3-77 is selected to the
"Hold-2" mode, dial "20" after the first
flashing the hookswitch in addition to the
above procedure. If the number except "20" is
dialed, the original call will be disconnected.
5-9