Table of Contents
Advertisement
1
.
1
.
3
F
o
r
V
i
g
o
1
.
1
.
3
F
o
r
V
i
g
o
LED
ACT (Activity)
USB
WAN2
WLAN
ADSL
VDSL
Line
Phone 1/2
LED on Connector
Left LED
GigaLAN
(Green)
1/2/3
Right LED
(Green)
Left LED
GigaLAN
(Green)
4/WAN
Right LED
(Green)
Vigor2850 Series Quick Start Guide
r
2
8
5
0
V
n
r
2
8
5
0
V
n
Status
Blinking
Off
On
Blinking
On
Off
Blinking
On
Blinking
On
Blinking
On
Blinking
On
Off
On
Off
Blinking
On
Off
Blinking
On
Off
On
Off
Blinking
On
Off
Explanation
The router is powered on and running normally.
The router is powered off.
USB device is connected and ready for use.
The data is transmitting.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
Wireless access point is ready.
It will blink slowly while wireless traffic goes through.
ACT and WLAN LEDs blink quickly and
simultaneously when WPS is working, and will return to
normal condition after two minutes. (You need to setup
WPS within 2 minutes.)
The router is ready to access Internet through ADSL
link.
Slowly: The ADSL connection is ready.
Quickly: The connection is training.
The router is ready to access Internet through VDSL
link.
Slowly: The VDSL connection is ready.
Quickly: The connection is training.
A PSTN phone call comes (in and out). However, when
the phone call is disconnected, the LED will be off.
There is no PSTN phone call.
The phone connected to this port is off-hook.
The phone connected to this port is on-hook.
A phone call comes.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
6
Hide quick links:
Advertisement
Table of Contents
