Honeywell TB7200 Series Application Manual page 34

PIR APPLICATION GUIDE FOR TB7200 AND TB7300 SERIES THERMOSTATS
TB-PIR Cover Installation
1. Remove security screw on the bottom of the thermostat cover.
2. Open up by pulling on the bottom side of thermostat. (Fig. 3)
3. Insert polarized connector from new cover into PIR female connector located on thermostat base. (Fig. 6)
PIR
Connector
4. Snap PIR thermostat cover into place and re-install the security screw. (Fig. 7)
5. Make appropriate parameter settings related to your application within the configuration menu or through the WEBStation-
AX as identified in the thermostat installation instructions.
63-4526—01
M21300
Fig. 5. Removing cover.
Fig. 6. PIR connector
Fig. 7. Replacing cover.
34