Safety Cover - Makita LS1000 Instruction Manual

Fig. 5
Fig. 6
CAUTION :
*When installing the blade, make sure that the direction of the arrow on the surface of
0
Use only the Makita socket wrench to install or remove the blade.
the blade i s compatible with that on the blade case.
Safety cover
When cutting operations are performed,
the safety cover rises as a result of contact
with the workpiece. The cover returns to
i t s
original position when the cut i s com-
pleted and the handle
is
raised. NEVER
DEFEAT OR REMOVE THE SAFETY
COVER. In the interest of your personal
safety, always maintain the safety cover in
a
freely moving condition. Any irregular
operation of the safety cover should
be corrected immediately. NEVER USE
THE TOOL WITH A FAULTY SAFETY
COVER. I f the see-through safety cover
becomes dirty, or sawdust adheres to it in such a way that the blade and/or workpiece i s
no longer easily visible; unplug the saw and clean the cover carefully with a damp cloth.
Do not use solvents or any petroleum-based cleaners on the plastic cover.
6