Makita LS1045 Instruction Manual page 7

Carrying tool
When carrying the tool, lower the handle
fully and press the stopper pin to lock the
handle in the lowered position. Secure the
turn base by means of the grip. The tool can
then be conveniently carried by the carrying
grip.
WARN I NG:
Be sure that the tool is unplugged first.
Stopper pin is for carrying purposes only
and not for any cutting operations.
Carrying grip
Bench mounting miter saw
This tool should be bolted with two bolts to
a level and stable surface using the bolt
holes provided in the tool's base. This will
help prevent tipping and possible injury.
Removing or installing saw blade
CAUTION:
Always be sure that the tool is switched off
and unplugged before removing or installing
the blade.
To remove the blade, use the socket
wrench to loosen the hex bolt holding the
center cover by turning it more than three
turns counterclockwise. Raise the safety
cover and center cover.
7