Table of Contents
Advertisement
ACCESSORIES
CAUTION
:
These accessories or attachments are recommended for use w i t h your Makita tool specified in this
manual. The use of any other accessories or attachments might present
a
risk
of
injury
to
persons.
The
accessories or attachments should
be
used only in t h e proper and intended manner
.TABLE SAW STAND
(Part No.
122251-6)
Set the stays below and assemble the legs
inside. Secure with cup square neck bolts
and nuts. Then attach rubber caps to
back of legs.
NOW
set
the saw on top of the assembled
stand and secure with 4 hex bolts, flat
washers and hex nuts.
Always secure stand with screws to the
floor or surface.
Use
3/8"
screws to secure (same proce-
dure as indicated on p. 8).
CAUTION: This i s
a
special stand built precisely for this Makita table saw.
Do
not
attach or set on other types.
19
Hide quick links:
Advertisement
Table of Contents
