Advertisement
Quick Links
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPTION AND MAIN APPLICATIONS
In the former easy type of Circular stand, there are some problems to
be improved such as the steadiness or the structure for attaching
Portable circular saw. Also, we thought Switch, Inclination/Up-and-
down of Saw, and Operativity could be improved. Now we have
improved all those points to meet the demand from overseas for a new
product which is easily carried and less expensive.
S
pecifications
Motor
Voltage
Current
Frequency
Rotation
Consuming power
Blade size
Max. incision depth 90
Capacity
Max. incision depth 45
Max. cutting width with Parallel ruler
Table
Width
Depth
Height
Outer size
Weight
Power supply cord
S
tandard equipment
1. Parallel ruler ( for parallel/standard size treating)...1pc
2. Sliding bevel (for bevel treating)...1pc
3. Cap (for jigsaw/router/blade mouth plate)...1pc
4. Pressing board/L (for attaching jigsaw/router/trimmer)...1pc
5. Pressing board/S (for attaching 3600/3601B)...1pc
6. Wrench 10-13 ( for adjusting Parallel ruler)...1pc
7. Wrench 19 (for attaching Saw)...1pc
8. Wrench 22 (for attaching Saw)...1pc
9. Countersunk head screw M6x50...1pc
O
ptional accesories
1. Circular saw machine stand( exclusively for Circular saw machine) 1set
2. Holder (w/clamp and screws, for extension table) 1set
3. Grooving cutter Width: 2.4~15mm
Flat washer 15 ( used for substitute for Plane/Flange)
Outer flange 30, (Thickness: 13mm, in case of cutter width 9mm or less)
4. Saw blade
Various saw blades are available; Saw diameter Ø168 ~Ø210
2708
203mm(8") Table saw
Series commutator motor
100V
14A
50/60Hz
4500rpm
1350W
Diameter of Saw attached to Machine (for export) 210mm
61mm
45mm
300mm( both right/left sides of Table)
660mm (When attaching Extension holder in special accessories:1200mm)
460mm (When attaching Extension holder in special accessories:730mm)
275mm ( When attaching Circular saw machine stand in specialaccesories :825mm)
W660mm x D460mm x H 375mm
17kgs
5m
New Tool
Advertisement
Related Manuals for Makita 2708
Summary of Contents for Makita 2708
- Page 1 ECHNICAL INFORMATION New Tool Models No. 2708 Description 203mm(8") Table saw ONCEPTION AND MAIN APPLICATIONS In the former easy type of Circular stand, there are some problems to be improved such as the steadiness or the structure for attaching Portable circular saw. Also, we thought Switch, Inclination/Up-and- down of Saw, and Operativity could be improved.
- Page 2 djustment 1. Split blade adjusting:Make a straight line with Saw. Adjust a gap with outer circle of Saw 2. Angle stopper adjusting:Adjust at 45 and 90 degrees on the basis of Table. 3. Scale arrow adjusting:Loosen the attaching screw for Arrow, and adjust it to the scale. 4.
- Page 3 [ Disassembly of Frame] (1) Removing Safety guide and Saw blade, reverse the main body , and take away Pointer A, Lever 80, Knob 45. (2) When removing Hex. Bolt M6x14 (4 pcs) attaching for Table by Spanner10, Frame will come off. Used tools for the above disassembly: driver, driver, Spanner 10-13, Spanner 22, Spanner 19,...