P Riority S Can; S Can R Evert - Kenwood NEXEDGE NX-200 Instruction Manual

p S
riority cAn
A Priority channel must be programmed in order for Priority
Scan to function.
When using a single Priority channel, the transceiver will
automatically change to the Priority channel when a call is
received on it, even if a call is being received on a normal
channel.
When using dual Priority channels, Priority channel  is given
precedence over Priority channel 2. So, if a call is received on
Priority channel  while a call is already on Priority
channel 2, the transceiver will automatically change to Priority
channel .
• " " appears on the display when the channel is Priority channel ,
" " appears when the channel is Priority channel 2, and " "
appears when the channel is both Priority channel  and 2.
S r
cAn evert
The Scan Revert channel is the channel selected when you
press the PTT switch to transmit during scan. Your dealer can
program one of the following Scan Revert channels:
Last Called + Selected: The last channel on which you
•
received a call is assigned as the new revert channel. If the
channel has been changed, the newly selected channel is
assigned as the new revert channel.
• Selected: The last channel selected is assigned as the
new revert channel.
• Selected + Talkback: If the channel has been changed,
the newly selected channel is assigned as the new revert
channel. The transceiver "talks back" on the current
channel.
Priority 1/ Priority 2: If your dealer has programmed a
•
Priority channel (either Priority  or Priority 2), this channel
is the revert zone and channel.
28