P Riority S Can; S Can R Evert - Kenwood TK-5210 Instruction Manual

p S
riority cAn
A Priority channel must be programmed in order for Priority
Scan to function.
When using a single Priority channel, the transceiver will
automatically change to the Priority channel when a call is
received on it, even if a call is being received on a normal
channel.
When using dual Priority channels, Priority channel  is given
precedence over Priority channel 2. So, if a call is received on
Priority channel  while a call is already on Priority
channel 2, the transceiver will automatically change to Priority
channel .
• On K2/K3/K5/K6/K7 model transceivers, "P" appears on the
display when the channel is Priority channel , "P2" appears when
the channel is Priority channel 2, and "PP" appears when the
channel is both Priority channel  and Priority channel 2.
S r
cAn evert
The Scan Revert channel is the channel selected when you
press the PTT switch to transmit during scan. Your dealer can
program one of the following Scan Revert channels:
• Selected: The last channel selected is assigned as the
new revert channel.
• Selected + Talkback: If the channel has been changed,
the newly selected channel is assigned as the new revert
channel. The transceiver "talks back" on the current
channel.
Priority 1/ Priority 2: If your dealer has programmed a
•
Priority channel (either Priority  or Priority 2), this channel
is the revert zone and channel.
• Priority 1 + Talkback/ Priority2 + Talkback: If your
dealer has programmed a Priority channel (either Priority 
or Priority 2), this channel is the revert zone and channel.
The transceiver "talks back" on the current receive channel.
• Last Called: The last channel on which you made a call is
assigned as the new revert channel.
25