DISPLAY settings
DIMMER
Adjust the brightness of the front panel display. The smaller the
value, the dimmer the display.
When the Eco function is enabled, the specified brightness is
applied for only a few seconds.
Selectable item: -4 to -1, 0* (brightest)
1)
OSD LANGUAGE
Use to select the language used for menus displayed on the TV
screen.
Selectable item:
(Japanese), ENGLISH* (English),
DEUTSCH (German), FRANÇAIS (French), ESPAÑOL
(Spanish), ITALIANO (Italian), NEDERLANDS (Dutch),
РУССКИЙ (Russian), SVENSKA (Swedish)
"
": Menus are displayed in Japanese.
"ENGLISH": Menus are displayed in English.
"DEUTSCH": Menus are displayed in German.
"FRANÇAIS": Menus are displayed in French.
"ESPAÑOL": Menus are displayed in Spanish.
"ITALIANO": Menus are displayed in Italian.
"NEDERLANDS": Menus are displayed in Dutch.
"РУССКИЙ": Menus are displayed in Russian.
"SVENSKA": Menus are displayed in Swedish.
DISTANCE UNIT
Use to change the display unit of measurement.
Selectable item: METERS, FEET*
If units used for displaying measurements are changed from
"METERS" to "FEET" or vice versa, the change will not be
reflected in current settings. Configure settings again to reflect
the change in units.
y
1)
• Hold down the SETUP key to display "OSD LANGUAGE" directly
on the TV screen.
• The settings may be changed automatically when using the TV which
supports the HDMI control function.
• Display language can only be selected for menus displayed on the TV
screen. Only alphanumeric characters are displayed in the front panel
display.
INFORMATION settings
Display information for the audio and video signal input to this
unit.
AUDIO
The following information on the current audio input signal is
displayed.
Format
Digital audio format
Number of
The number of channels contained within the input
channels
signal—front/surround/low field effects (LFE).
Example: "3/2/0.1" means signal contains 3 front
channels, 2 surround channels, and LFE.
If the signal contains channels other than front,
surround, and LFE, the total number of channels
may be displayed. Example: "5.1ch".
Sampling
The sampling frequency of the digital input signal
frequency
2)
Bit rate
The per-second bit rate of the input signal
VIDEO
The following information on the current video input signal is
displayed.
Type
HDMI or DVI
Resolution
Video signal resolution
SYSTEM
Display the version of firmware currently installed on this unit.
y
2)
Audio bit rate may not be displayed for some input signals.
Setup menu
65
En