Tone Control; Display Menu - Yamaha YSP-800 Owner's Manual

To achieve the best quality snrround sound, yon can use MANUAL SETUP to fine-tune the listening environment
parameters, as v,.ell as to make advanced settings t_r speaker positions, sonnd beams, digital input and the OSD. Change
the initial settings (indicated in bokt under each parameter) to reflect the needs of yonr own listening environment.
_.,#._
• You can save the settings optimized by the AUTO SETUP procedure (see page 34). A set of settings optimized according to specific
conditions of your listening environmm/t can be recalled later depending on the varying conditions of your listening mwiromnent (see
page 35).
• Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you mn AUTO SETUP (see page 26). Use
SOUND MENU and BEAM MENU to make additional ac[justments.
• BEAM MENU allows you to make settings lor the surround sound eltects normally available in the speaker settings inenu.
• Make settings for the parameters in BEAM MENU first before you make settings for the parameters in SOUND MENU. INPUT
MENU and DISPLAY MENU.
SOUND MENU
Use to manually adjust various parameters related to tile souM output.
Item Features Page
TONE CONTROL Adjusts the output level of high-frequency or low-frequency sound. 69
BEAM LEVEL Adjusts the output level of each beam. 69
SUBWOOFER SET Adjusts the various subwoofcr settings. 70
MUTE LEVEL
Adjusts the muting level. 70
AUDIO DELAY Adjusts audio delay. 70
BOOM EQ Adjusts Ihe tonal quality of the listening room. 70
DD/DTS Dynamic Range Adjusts the dynamic range of Dolby Digital or DTS signals. 71
BEAM MENU
Use to manually adjust various parameters related to tile sound beam output.
Item Features Page
SETTING PARAMETERS Adjusts listening room and listening position settings. 65
BEAM ADJUSTMENT Adjusts various beam settings. 66
IMAGE LOCATION Adjusts the position of the front left and right speakers. 68
INPUT MENU
Use to manually adjust various parameters related to the audio and video input.
Item Features Page
INPUT ASSIGNMENT Assigns jacks according to the component to be used. 71
INPUT MODE Selects the initial input of the source. 72
INPUT TRIM Adjusts the input level of the source. 72
INPUT RENAME Renames the displayed input source. 72
DISPLAY MENU
Use to manually adjust various parameters related to tile display.
Item Features
DIMMER SET
Adjusts the brightness of the disph,y.
OSD SET Adjusts the display position and the background color of the OSD.
UNIT SET Changes the display unit of measurement.
Page
74
74
63