Yamaha HTY-7030 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Projector
  5. HTY-7030
  6. Owner's manual

Yamaha HTY-7030 Owner's Manual

Digital sound projector
Hide thumbs Also See for HTY-7030:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
G
HTY-7030
Digital Sound Projector
TM
Système Acoustique Numérique
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
GEBRUIKSAANWIJZING
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

Advertisement

Table of Contents
loading

Related Manuals for Yamaha HTY-7030

Summary of Contents for Yamaha HTY-7030

  • Page 1 HTY-7030 Digital Sound Projector Système Acoustique Numérique OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ...
  • Page 2 Yamaha will not pin plug. be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 3: Table Of Contents

    Contents Manual tuning ............49 INTRODUCTION Automatic preset tuning .......... 50 Manual preset tuning ..........51 Overview ..............2 Selecting a preset station ........52 Features ..............3 Displaying the Radio Data System information Using this manual ..........5 (Europe model only) ........... 52 Supplied accessories ..........

  • Page 4: Overview

    The HTY-7030 projects sound beams containing surround sound information for the front right (R), front left (L), surround right (SR), and surround left (SL) speaker positions, which are reflected off the walls of your listening room before reaching the actual listening position.

  • Page 5: Features

    (U.S.A., Canada, and Australia models only) DOCK terminal to connect a Yamaha iPod universal dock (such as the YDS-10, sold separately), which supports iPod (Click and Wheel), iPod nano, and iPod mini...
  • Page 6 ” are trademarks of 1 Ltd. The “ ” logo and “Cinema DSP” are registered trademarks of YAMAHA Corporation. TruBass, SRS and the “ ” symbol are registered trademarks of SRS Labs, Inc. TruBass technology is incorporated under Manufactured under license from Dolby Laboratories.

  • Page 7: Using This Manual

    Using this manual Using this manual Notes • This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. •...

  • Page 8: Supplied Accessories

    Supplied accessories Supplied accessories Check that you have received all of the following parts. Remote control ( 1) Fasteners ( 4) Optical cable ( 1) STANDBY/ON POWER POWER DOCK AUX1 AUX2 AUX3 MACRO INPUT1 PRESET/TUNE SEARCH MEMORY FM/XM AUTO VOL MODE SETUP INPUTMODE SLEEP...

  • Page 9: Controls And Functions

    Controls and functions Controls and functions Front panel INPUT STANDBY/ON VOLUME AUX 3 INTELLIBEAM MIC 1 AUX 3 input jack 6 VOLUME +/– Connect your portable audio player (see page 26). Controls the volume level of all audio channels (see page 47).

  • Page 10: Front Panel Display

    Controls and functions Front panel display 1 HDMI indicator A NIGHT indicator Lights up when the signal of the selected input source is Lights up when one of the night listening enhancers is input at the HDMI IN jack(s). selected (see page 67). 2 TUNER indicators B SLEEP indicator FM: Light up when this unit is receiving an FM broadcast.

  • Page 11: Rear Panel

    A XM antenna jack (U.S.A., Canada, and Australia models only) (U.S.A and Canada models only) Connect the Yamaha iPod universal dock (such as YDS- 10, sold separately) (see page 2 in the Reference Guide). Connect your XM Mini-Tuner Dock (sold separately) (see page 5 in the Reference Guide).

  • Page 12: Remote Control (Europe, Australia, Asia, And Korea Models)

    Controls and functions Remote control (Europe, Australia, Asia, and Korea models) 1 Infrared window This section describes the functions of the remote control used to control this unit. Some buttons marked with an Outputs infrared control signals. Aim this window at the asterisk (*) share the common functions between the YSP component you want to operate.
  • Page 13 Controls and functions F DVD player/VCR control buttons T RETURN Control your DVD player or VCR (see pages 98 and 99). Selects sleep timer settings or returns to the previous SET MENU screen. G My Beam microphone U TV VOL +/– Collects the test tones from this unit when using the My Beam auto-adjust function (see page 61).
  • Page 14 Controls and functions 1 PRESET/TUNE This section describes the functions of the remote control used to control FM, Radio Data System, or iPod when the FM: Switches between the preset search mode and the TV/AV mode is selected with the operation mode selector frequency search mode (see pages 49 to 52).

  • Page 15: Remote Control (U.s.a. And Canada Models)

    Controls and functions Remote control (U.S.A. and Canada models) 1 Infrared window This section describes the functions of the remote control used to control this unit. Some buttons marked with an Outputs infrared control signals. Aim this window at the asterisk (*) share the common functions between the YSP component you want to operate.
  • Page 16 Controls and functions F DVD player/VCR control buttons T RETURN Control your DVD player or VCR (see pages 98 and 99). Selects sleep timer settings or returns to the previous SET MENU screen. G My Beam microphone U TV VOL +/– Collects the test tones from this unit when using the My Beam auto-adjust function (see page 61).
  • Page 17 Controls and functions 1 PRESET/TUNE This section describes the functions of the remote control used to control FM, XM Satellite Radio, or iPod when the FM: Switches between the preset search mode and the TV/AV mode is selected with the operation mode selector frequency search mode (see pages 49 to 52).

  • Page 18: Installation

    Installation Installation This section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand. Depending on your installation environment, connections with external components can be done before installing this unit. We recommend that you temporarily place and arrange all components, including this unit, in order to decide which procedure should come first.
  • Page 19 Installation Installation examples Example 1 Install this unit as close to the exact center of the wall as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening position as possible.
  • Page 20 Metal wall bracket When this unit is installed above your TV This unit HTY-7030 24- 7x22 4- 7 When this unit is installed under your TV SPM-K30 (Option) Note...

  • Page 21: Connections

    Connections Connections This unit is equipped with the following types of audio/video input/output jacks/terminal: For audio input For audio output • 2 optical digital input jacks • 1 subwoofer output jack • 2 coaxial digital input jacks For audio/video output •...

  • Page 22: Before Connecting Components

    Connections Before connecting components Cables used for connections Affixing cables To prevent cables from becoming unplugged, place the Audio/Video supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, HDMI cable and then affix cables in the cable clamp.

  • Page 23: Connections Using Hdmi Cables

    Connections Connections using HDMI cables This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 22 to 25.

  • Page 24: Connecting A Tv

    Connections Connecting a TV For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGITAL INPUT jack on this unit.

  • Page 25: Connecting A Dvd Player/Recorder

    Connections Connecting a DVD player/recorder Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital audio connection.

  • Page 26: Connecting A Digital Satellite Tuner Or A Cable Tv Tuner

    Connections Connecting a digital satellite tuner or a cable TV tuner Connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the TV/STB AUDIO INPUT jacks on this unit.

  • Page 27: Connecting A Digital Airwave Tuner

    Connections Connecting a digital airwave tuner Connect the TV/STB AUDIO INPUT jacks on this unit to the analog audio output jacks on your TV. Connect the optical digital output jack on your digital airwave tuner to the TV/STB OPTICAL DIGITAL INPUT jack on this unit in addition to the analog audio connection.

  • Page 28: Connecting A Portable Audio Player

    Connections Connecting a portable audio player Connect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. Front panel of this unit AUX 3 Analog audio output Portable audio player Audio 3.5 mm stereo mini plug cable...

  • Page 29: Connecting Other External Components

    Connections Connecting other external components If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL INPUT jack on this unit.

  • Page 30: Connecting A Subwoofer

    Connections Connecting a subwoofer Connect the monaural input jack on your subwoofer to the SUBWOOFER OUT jack on this unit. This connection alone does not output sound from the connected subwoofer. To output sound from the connected subwoofer, turn on the power of your subwoofer and then run AUTO SETUP (see page 35) or select SWFR for BASS OUT in SUBWOOFER SET (see page 78).

  • Page 31: Connecting The Fm Antenna

    Connections Connecting the FM antenna Connect the supplied FM antenna to the FM ANTENNA jack on this unit. FM indoor antenna (supplied) Rear panel of this unit (U.S.A. and Canada models) ANTENNA AUDIO INPUT DIGITAL INPUT VIDEO AUX 2 COAXIAL OPTICAL AUX 1 TV/STB...

  • Page 32: Getting Started

    GETTING STARTED Getting started Installing batteries in the remote Remove the transparent sheet before using the remote control. control Press Operation range of the remote control The remote control transmits a directional infrared beam. Use the remote control within 6 m (20 ft) of this unit and point it toward the remote control sensor of this unit during operation.

  • Page 33: Turning On This Unit Or Setting It To The Standby Mode

    Getting started Turning on this unit or Press STANDBY/ON again to set this unit to setting it to the standby mode the standby mode. Note When this unit is in the standby mode, only STANDBY/ON on the front panel or on the remote control is operational, and the other control buttons on the front panel or on the remote control are not operational until the power of this unit is turned on.

  • Page 34: Using Set Menu

    Turn on the power of your TV. connected to the VIDEO OUT jack on this unit The following screen appears on your TV. to display the OSD of this unit. HTY-7030 Press STANDBY/ON to turn on the power of this unit. STANDBY/ON...

  • Page 35: The Flow Chart Of Set Menu

    Using SET MENU The flow chart of SET MENU The following diagram illustrates the overall flow of the setup procedure. Run LANGUAGE SETUP. See “Changing OSD language” on page 34. Run AUTO SETUP (IntelliBeam). See “AUTO SETUP (IntelliBeam)” on page 35. If an error occurs Look for a remedy.

  • Page 36: Changing Osd Language

    CHANGING OSD LANGUAGE Changing OSD language This feature allows you to select the language of your choice that appears in SET MENU of this unit. Set the operation mode selector to YSP. Press to select the desired language, and press ENTER. TV/AV ENTER ENTER...

  • Page 37: Auto Setup (Intellibeam)

    AUTO SETUP (INTELLIBEAM) AUTO SETUP (IntelliBeam) This unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as you would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.

  • Page 38: Installing The Intellibeam Microphone

    AUTO SETUP (IntelliBeam) Installing the IntelliBeam microphone The supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual listening environment. Follow the procedure below to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there are no large obstacles between the IntelliBeam microphone and the walls in your listening room.

  • Page 39: Using Auto Setup (Intellibeam)

    AUTO SETUP (IntelliBeam) Using AUTO SETUP (IntelliBeam) Once the IntelliBeam microphone is firmly connected to this unit and properly placed in your listening room, follow the procedure below to start the AUTO SETUP procedure. You can also enter the AUTO SETUP procedure simply by pressing and holding AUTO SETUP for more than two seconds.

  • Page 40: Press Menu

    AUTO SETUP (IntelliBeam) Notes Press MENU. The SET MENU screen appears on your TV. • Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP procedure. • To achieve the best results possible, evacuate yourself from SET MENU your listening room until the AUTO SETUP procedure is completed so that you may not obstruct the path of sound...
  • Page 41 AUTO SETUP (IntelliBeam) Press to select BEAM+SOUND Check the following points once again before OPTIMZ, BEAM OPTIMZ only, or SOUND starting the AUTO SETUP procedure. OPTIMZ only and then press ENTER. • Is the IntelliBeam microphone firmly connected to this unit? The following screen appears on your TV.
  • Page 42 AUTO SETUP (IntelliBeam) Check that the following screen is displayed Press ENTER to confirm the results or press on your TV. RETURN to cancel the results. The results of the AUTO SETUP procedure are The following screen is displayed for two seconds displayed on your TV.

  • Page 43: Error Messages For Auto Setup

    If position/connection and re-try. the problem persists, contact the nearest authorized Yamaha service center for assistance. ERROR E-7 An internal system error occurred. Repeat the AUTO SETUP procedure.

  • Page 44: Using The System Memory

    USING THE SYSTEM MEMORY Using the system memory Convenient usage of the system Press to select MEMORY and press memory ENTER. The following screen appears on your TV. You can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save certain settings according to the varying conditions of your listening environment.

  • Page 45: Loading Settings

    Using the system memory Loading settings Press to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER. You can recall the settings saved in “Saving settings” on The following screen appears on your TV. page 42 according to the varying conditions of your listening environment.
  • Page 46 Using the system memory Press to select LOAD and press Press ENTER again. ENTER. The new parameters saved as MEMORY1, MEMORY2, or MEMORY3 are loaded. Once the The following screen appears on your TV. parameters are loaded, the display returns to the SET MENU screen.

  • Page 47: Playback

    PLAYBACK Playback Front panel operations Selecting the input source Press INPUT on the front panel repeatedly to You can play back sound from the components connected toggle between TV, STB, DVD, AUX1, AUX2, and to this unit simply by pressing INPUT on the front panel AUX3.

  • Page 48: Playing Back Sources

    Playback Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the Switch to the video input on your TV using rear panel of this unit. the remote control supplied with the TV and display the DVD menu screen.

  • Page 49: Adjusting The Volume

    Playback Muting the sound Adjusting the volume VOLUME TV VOL MUTE TV INPUT TV MUTE CODE SET Press MUTE to mute the sound. “AUDIO MUTE ON” appears in the front panel display, and the volume level indicator flashes. MUTE INPUT VOLUME STANDBY/ON VOLUME...

  • Page 50: Fm Tuning

    FM TUNING FM tuning There are two tuning methods: automatic and manual. Automatic tuning is effective when the radio signal is strong and there is no interference. If the radio signal is weak, tune into the FM station manually. You can also use the automatic and manual preset tuning features to store up to 40 stations in total (A1 to E8: 5 preset station groups with 8 preset station numbers each).

  • Page 51: Automatic Tuning

    FM tuning Automatic tuning Press ENTRY ) once to begin automatic tuning. Automatic tuning is effective when the radio station When this unit is tuned into an FM station, the signals are strong and there is no interference. TUNED indicator lights up and the frequency of the station appears in the front panel display.

  • Page 52: Automatic Preset Tuning

    FM tuning Press SEARCH repeatedly until the AUTO Press FM to select FM as the input source. indicator disappears from the front panel “FM” appears in the front panel display. display. SEARCH • You can also press INPUT on the front panel repeatedly to select FM as the input source.

  • Page 53: Manual Preset Tuning

    FM tuning Manual preset tuning • If the colon (:) does not appear, press PRESET/TUNE to display the colon. You can also store up to 40 stations (A1 to E8: 5 preset • U.S.A. and Canada models use CAT/A-E station groups with 8 preset station numbers each) •...

  • Page 54: Selecting A Preset Station

    FM tuning Selecting a preset station Press ENTRY ) to select the desired preset station number (1 to 8). You can tune into the preset stations simply by selecting The preset station group and number appear in the the preset station groups and numbers. front panel display together with the station band and frequency.
  • Page 55 FM tuning Tune into the desired Radio Data System Program type Descriptions broadcasting station. NEWS News We recommend automatic preset tuning to tune into the Radio Data System broadcasting stations (see AFFAIRS Current affairs page 50). INFO General information Note SPORT Sport The AUTO PS feature of this unit changes the frequency...

  • Page 56: Enjoying Surround Sound

    ENJOYING SURROUND SOUND Enjoying surround sound You can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Surround for multi-channel playback. Notes •...

  • Page 57: Stereo Plus 3 Beam

    Enjoying surround sound Stereo plus 3 Beam Notes • When you play back multi-channel sources, surround left and Outputs normal sound from the front left and right right signals are mixed down and output from the front left and channels and sound beams from the center and surround right channels.
  • Page 58 Enjoying surround sound Decoder indicators Surround modes and recommended sources Depending on the input source and the selected surround mode, the decoder indicators in the front panel display Recommended light up as follows: Surround mode source Status Indicator Dolby Pro Logic –...

  • Page 59: Enjoying 2-Channel Sources In Surround Sound

    Enjoying surround sound Enjoying 2-channel sources Press SUR. DECODE repeatedly (or press in surround sound SUR. DECODE and then press ) to switch between surround modes. This unit can decode 2-channel sources for 5.1-channel Choices: Neo:6 Cinema, Neo:6 Music, PRO LOGIC, playback so that you can enjoy a variety of surround sound PLII Movie, PLII Music, PLII Game, neural surround effects by switching the surround mode.

  • Page 60: Enjoying Tv In Surround Sound

    Enjoying surround sound Enjoying TV in surround sound If you hear sound from your TV speakers, reduce the volume level of your TV until you You can enjoy analog audio signals output from your TV can no longer hear any audio being output. in real surround sound.

  • Page 61: Adjusting Surround Mode Parameters

    Enjoying surround sound When Dolby Pro Logic II Music is Adjusting surround mode selected parameters PANORAMA Gives the front left and right channel sound a You can configure the parameters for Dolby Pro Logic II wraparound effect, distributed throughout the entire Music and DTS Neo:6 Music to fine-tune the surround surround sound field to give you an expansive feeling.

  • Page 62: Enjoying Stereo Sound

    ENJOYING STEREO SOUND Enjoying stereo sound You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control. Notes • When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes compressed.

  • Page 63: Playing Back Sound Clearly (My Beam)

    PLAYING BACK SOUND CLEARLY (MY BEAM) Playing back sound clearly (My Beam) You can improve listenability in a noisy environment by changing the beam mode to My Beam, which outputs sound beams directly toward the listening position in a single channel. In addition, My Beam is also ideal when you do not want the sound beams to be reflected on the walls in your listening room or when you do not want to disturb other people while enjoying music or movies at night.

  • Page 64: Using Manual-Adjust Function

    Playing back sound clearly (My Beam) Using manual-adjust function You can adjust the beam angle manually while playing back an input source. This function is also ideal if the listening position is out of the operation guarantee range of the auto-adjust function. Set the operation mode selector to YSP.

  • Page 65: Using Sound Field Programs

    The acoustics in your room could be changed to those of a concert hall, a dance floor, or a listening room of virtually any size at all. This ability to create sound fields at will is exactly what Yamaha has done with...

  • Page 66: Cinema Dsp Programs

    Using sound field programs Movie program CINEMA DSP programs Select this CINEMA DSP program when you play back movie sources, especially the ones encoded in Dolby You can select from three different CINEMA DSP Digital, DTS, or Dolby Surround. This program clearly programs (MUSIC, MOVIE, and SPORTS) depending on reproduces dialog and sound effects, thus creating a broad the type of source you want to enjoy.
  • Page 67 Using sound field programs Turning off CINEMA DSP programs Turn off the CINEMA DSP programs if you want to enjoy Press MUSIC, MOVIE, or SPORTS to select the original sound without the CINEMA DSP program the desired CINEMA DSP program. effect.

  • Page 68: Using The Music Enhancer

    USING THE MUSIC ENHANCER Using the music enhancer You can use the Music Enhancer of this unit to improve the sound nearest to the original depth and width of compression artifacts such as the MP3 format. MUSIC MOVIE SPORTS Press ENHANCER repeatedly to switch between the Music Enhancer levels (OFF, SUR.

  • Page 69: Using The Volume Mode (Night Listening Enhancer/Tv Volume Equal Mode)

    USING THE VOLUME MODE (NIGHT LISTENING ENHANCER/TV VOLUME EQUAL MODE) Using the volume mode (Night listening enhancer/TV volume equal mode) The night listening enhancers are designed to improve listenability at lower volumes or at night. In addition, you can limit the volume level of the TV so that it will not vary suddenly to a great extent whenever the contents being broadcast change (i.e.

  • Page 70: Using The Sleep Timer

    USING THE SLEEP TIMER Using the sleep timer Use this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. Each time you press SLEEP, the front panel display PRESET/TUNE SEARCH...
  • Page 71 Using the sleep timer Canceling the sleep timer Set the operation mode selector to YSP. TV/AV Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. SLEEP Wait for a few seconds without operating this unit to confirm the setting for the sleep timer. The SLEEP indicator disappears from the front panel display, indicating that the sleep timer is deactivated.

  • Page 72: Displaying The Input Source Information

    DISPLAYING THE INPUT SOURCE INFORMATION Displaying the input source information You can display the format and sampling frequency of the current input signal in the front panel display. Press DISPLAY. SUR. DECODE The information on the current input signal is displayed as follows: ENHANCER ENTRY...

  • Page 73: Using The Hdmi Control Feature

    USING THE HDMI CONTROL FEATURE Using the HDMI control feature You can operate the following functions using the remote control supplied with your TV if this unit and an HDMI control-compatible TV (except some models) are connected via HDMI. • Turning on or off the power (synchronized operation with the TV) •...

  • Page 74: Manual Setup

    MANUAL SETUP MANUAL SETUP To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to make advanced settings for sound signals, sound beams, digital input, and the OSD. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.

  • Page 75: Using Manual Setup

    MANUAL SETUP Using MANUAL SETUP Press to select MANUAL SETUP and press ENTER. Use the remote control to access and adjust each The following screen appears on your TV. parameter. MUSIC MOVIE SPORTS SUR. DECODE ENTER ENTER ENHANCER ENTRY MENU TV/AV CAT/ ENTER...

  • Page 76: Beam Menu

    MANUAL SETUP ANGLE TO WALL BEAM MENU FLAT TO WALL OR CORNER Use to manually adjust the various parameters related to the sound beam output. SET MENU MANUAL SETUP BEAM MENU 2)BEAM MENU A)SETTING PARAMETERS B)BEAM ADJUSTMENT C)IMAGE LOCATION • Select FLAT TO WALL if this unit is installed in parallel with the wall in your listening room.
  • Page 77 MANUAL SETUP • Select ANGLE TO WALL OR CORNER if this unit is BEAM ADJUSTMENT (Beam adjustment) installed in the corner of your listening room. Adjust Use to manually adjust the various sound beam settings. the width and length of your listening room as well as We recommend that you select 5 Beam as the beam mode the distance of the listening position from this unit.
  • Page 78 MANUAL SETUP BEAM TRAVEL LENGTH (Beam travel length) FOCAL LENGTH (Focal length) A certain amount of delay must be applied to the sound Use to set the distance from the front of this unit to the from each channel so that all sounds can arrive at the focal point of output for each channel to achieve an listening position at the same time.
  • Page 79 MANUAL SETUP TREBLE GAIN (Treble gain) IMAGE LOCATION (Image location) Use to adjust the high-frequency output level of each Use to adjust the direction from which the front left and channel. right channel sound is heard so that each sound can be heard closer to the center channel.

  • Page 80: Sound Menu

    MANUAL SETUP BASS OUT (Bass out) SOUND MENU Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and right channels. This Use to manually adjust the various parameters related to setting also determines the routing of LFE (low-frequency the sound output.
  • Page 81 MANUAL SETUP AUDIO DELAY (Audio delay) DD/DTS Dynamic Range Use to delay the sound output and synchronize it with the (Dynamic range of Dolby Digital and video image. This may be necessary when using certain DTS signals) LCD monitors or projectors. Use to select the amount of dynamic range compression.

  • Page 82: Input Menu

    MANUAL SETUP INPUT MODE (Input mode) INPUT MENU Use to designate the input mode for the input sources connected to the DIGITAL INPUT jacks when you turn on Use to manually adjust the various parameters related to the power of this unit. For information on the types of the audio and video input.
  • Page 83 MANUAL SETUP • Select AUX1 ANALOG to adjust the level of audio and video signals input at the AUX 1 AUDIO INPUT jacks Press to select the desired character. of this unit. • You can use up to 8 characters for each input. Control range: –6.0 dB to 0.0 dB •...
  • Page 84 TV via HDMI. You can turn on or off the HDMI OUT jack of this unit. power, select the input mode, and adjust the volume level Choices: HTY-7030, OTHER of this unit using the remote control supplied with your HDMI control-compatible TV. For details, see “Using the HDMI control feature”...

  • Page 85: Display Menu

    MANUAL SETUP OSD SET (OSD settings) DISPLAY MENU Use to adjust the display position and to set the display time of the OSD. Use to manually adjust the various parameters related to the display. B)OSD SET SET MENU MANUAL SETUP DISPLAY MENU OSD SHIFT;;;;;;;;;;0 4)DISPLAY MENU...

  • Page 86: Adjusting The Audio Balance

    Adjusting the audio balance Adjusting the audio balance You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience. Using the test tone Press to select the channel you want...

  • Page 87: Using The Audio Output Being Played Back

    Adjusting the audio balance Press TEST when you have completed all Set the operation mode selector to YSP. your adjustments. TV/AV TEST Press CH LEVEL repeatedly (or press CH LEVEL and ) to select the channel Notes you want to adjust. The front panel display changes as follows.
  • Page 88 Adjusting the audio balance Press to adjust the channel volume. ENTER Control range: –10.0 dB to +10.0 dB Wait for a few seconds without operating this unit when you have completed your adjustment. Notes • All channel levels cannot be adjusted when the 2-channel or 5- channel stereo playback (see page 60), or My Surround (see page 55) is selected as the beam mode.

  • Page 89: Selecting The Input Mode

    Selecting the input mode Selecting the input mode You can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2. We recommend setting the input mode to AUTO in most cases.

  • Page 90: Adjusting The System Parameters

    Adjusting the system parameters Adjusting the system parameters This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to adjust and customize the way this unit operates. Note When “F.PANEL KEY” is set to “F.PANEL: OFF” (see page 93), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON on the remote control instead to adjust the system parameters.

  • Page 91: Setting The Memory Protect

    Adjusting the system parameters Setting the MEMORY PROTECT Press to switch between “PROTECT: ON” and “PROTECT: OFF”. You can protect the settings you saved in the system memory of this unit from being accidentally erased or unwantedly changed. ENTER Repeat steps 1 to 3 in “Using the system parameters”...

  • Page 92: Setting The Max Volume

    Adjusting the system parameters Setting the MAX VOLUME Press to adjust the maximum volume level. You can set the maximum volume level so that this unit will not output sound beyond the limited volume level. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 93: Setting The Demo Mode

    Adjusting the system parameters Setting the DEMO MODE Press so that “TURN ON VOLUME” is displayed in the front panel display. You can test the sound beam output from this unit to experience the sound beam. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 94: Setting The Panel Input Key

    Adjusting the system parameters Setting the PANEL INPUT KEY Press to switch between “DEMO: ON” and “DEMO: OFF”. You can disable the INPUT on the front panel when you adjust the system parameters. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 95: Disabling The Front Panel Keys

    Adjusting the system parameters Disabling the front panel keys Press to switch between “P.INPUT: ON” and “P.INPUT: OFF”. You can disable the front panel keys except when you adjust the system parameters. Repeat steps 1 to 3 in “Using the system ENTER parameters”...

  • Page 96: Setting The Factory Preset

    Adjusting the system parameters Setting the FACTORY PRESET Press to switch between “F.PANEL: ON” and “F.PANEL: OFF”. You can reset all of the parameters of this unit to the factory presets. This procedure completely resets ALL the parameters in SET MENU. ENTER Note After performing the following procedure you must run AUTO...
  • Page 97 Adjusting the system parameters Press to switch between “PRESET: RESET” and “PRESET: CANCEL”. ENTER • Select PRESET: RESET to reset all of the current settings. • Select PRESET: CANCEL to cancel the resetting procedure. Press STANDBY/ON on the remote control to set this unit to the standby mode.

  • Page 98: Remote Control Features

    Remote control features In addition to controlling this unit, the remote control can also operate other AV components made by Yamaha and other manufacturers. To control other components, you must set up the remote control with the appropriate remote control codes and set the operation mode selector to TV/AV to change the control area.

  • Page 99: Controlling Other Components

    Remote control features Controlling other components 1 Numeric buttons Operating your TV Selects a TV channel for playback. Set the operation mode selector to TV/AV, and 2 CH +/– press TV to select TV as the input source. Switches between the available TV channels. The control area of the remote control changes to the TV operation mode.
  • Page 100 Remote control features Operating your DVD player/recorder Operating your STB (CATV/Satellite tuner) Set the operation mode selector to TV/AV and press DVD to select DVD as the input source. Set the operation mode selector to TV/AV and The control area of the remote control changes to the DVD press STB to select STB as the input source.
  • Page 101 Remote control features Operating your VCR Set the operation mode selector to TV/AV and press AUX1 to select VCR as the input source. The control area of the remote control changes to the AUX1 operation mode. This operation is available when your VCR is connected to the AUX 1 AUDIO INPUT jacks on this unit.

  • Page 102: Using The Tv Macro

    Remote control features Setting macros for the TV with the Using the TV macro tuning capability The TV macro feature makes it possible to perform a Press and hold CODE SET and press one of series of operations with the press of a single button. For the input selector buttons to select the input example, when you want to play a DVD, you would source you want to set macros for.
  • Page 103 Remote control features Setting macros for the TV without the Operating macros tuning capability Press and hold one of the input selector buttons Press and hold CODE SET and press one of for approximately two seconds to select the input the input selector buttons to select the input source you want to operate macros for.

  • Page 104: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the AC power supply cable, and contact the nearest authorized Yamaha dealer or service center. General...
  • Page 105 2-channel audio signals at the source component such as a DVD player. “SUPPORT AUDIO” is set to “HTY-7030”. Set “SUPPORT AUDIO” to “OTHER”. There is noise interference This unit is too close to the digital or high- Move this unit farther away from such —...
  • Page 106 Troubleshooting Remote control Problem Cause Remedy page The remote control does not Wrong distance or angle. The remote control functions within a work and/or function maximum range of 6 m (20 ft) and no more properly. than 45 degrees off-axis from the front panel.

  • Page 107: Glossary

    Glossary Glossary Dolby Digital DTS Digital Surround Dolby Digital is a digital surround sound system that gives DTS digital surround was developed to replace the analog you completely independent multi-channel audio. With 3 soundtracks of movies with a 6-channel digital sound front channels (left, center, and right) and 2 surround track, and is now rapidly gaining popularity in movie stereo channels, Dolby Digital provides 5 full-range audio...

  • Page 108: Lfe 0.1-Channel

    Glossary LFE 0.1-channel This channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-frequency range compared to the full-range reproduction by the other 5/6 channels in Dolby Digital or DTS 5.1/6.1-channel systems.

  • Page 109: Index

    Index Index Numerics 3 Beam ................55 MANUAL SETUP ............72 5 Beam ................54 MEMORY ...............42 Movie program..............64 Music program ..............64 AC power supply cable ........... 29 My Beam.................61 Audio pin cable............... 20 AUTO SETUP (IntelliBeam).......... 35 Night listening enhancer ..........67 Battery................

  • Page 110: Specifications

    Specifications Specifications AMP SECTION FM SECTION • Maximum Output Power (JEITA) • Tuning Range ..........2 W (1 kHz, 10% THD, 4 ) 21 [U.S.A. and Canada models] ......87.5 to 107.9 MHz 20 W (100 Hz, 10% THD, 4 ) [Asia model] ......
  • Page 111 (http://www.yamaha-hifi.com/ or http://www.yamaha-uk.com/ for U.K. resident). The product is guaranteed to be free from defects in workmanship or materials for a period of two years from the date of the original purchase. Yamaha undertakes, subject to the conditions listed below, to have the faulty product or any part(s) repaired, or replaced at Yamaha’s discretion, without any charge for parts or labour.

This manual is also suitable for:

Ysp-3000

Table of Contents