Rear Panel Terminology And Description - Mitsubishi VS-472R Owner's Manual

REAR PANEL TERMINOLOGY AND DESCRIPTION
L
--'--L--.,
__) 120V
60Hz
200_N
I
1_] AUDIO (R (MONO), L)
INPUT terminals
AUDIO (R, L)
OUTPUT terminals
SPEAKER switch -----J-
[_ EXTernal SPeaker----_
terminals
---{_ AC outlet
---ArIT--
UHF--
[_ ----_
0oo
VHF-- __
audio wo_o
R I VIDEO
kEF
E): f SP(SQ}
-[_ UHF antenna
terminals
-_] VHF (A, B)
antenna terminal
-[_ VIDE() INPUT
terminals
"_ VIDE() OUTPUT
terminal
[] AUDIO (R (MONO), L) INPUT Terminals
The AUDIO INPUT terminals (RCA-type) are
used for direct connection to the audio output
from a VCR, Video Disc Player, etc.
AUDIO (R, L) OUTPUT Terminals
This terminals are used for direct connection to
the high level (aux.) terminals of an audio
amplifier.
[-3_ SPEAKER Switch
The SPEAKER switch is set to the "INT"
position for normal operation with sound out-
put from the built-in speaker system. When
connected to external speakers or an external
audio system, the built-in speakers can be
turned off by setting the speaker switch to the
"EXT" position.
Switching between internal and external
speakers with volume at high level is not
recommerded because damage may occur.
Turn off the set before switching speakers.
I-_4] EXTernal SPeaker Terminals
The EXTernal SPeaker terminals are used for
connection of a stereo pair of separate speak-
ers. The volume level of the signal from the
EXTernal SPeaker terminals is adjusted with
the VOL • and VOI__• buttons.
[_5] AC Outlet
This AC outlet (120V 60Hz) is provided for
convenience when connecting external equip-
ment. Do not exceed the maximum power
rating of 200 watt.
[-6] UHF Antenna Terminal
Connect the lead from the UHF antenna to
these terminals.
_-_] VHF (A, B) Antenna Terminal
Connect the lead from the VHF antenna to this
terminal, either direct, or using the matching
transformer provided.
[8-] VIDEO INPUT Terminals
The VIDEO IIklPUT terminals (RCA-type) are
used for direct connection to the video output
from a VCFI, _/ideo Disc Player, etc.
_] VIDEO OUTPUT Terminal
This terminal i_ use for direct connection to the
Video input terminal of a VCR, Video Copy
Processor.
N OTE:
Refer to the "CONNECTING YOUR TV TO AN ANTENNA, CABLE, OR V('R." section for
details.