Front Control Panel - Mitsubishi Mr.Slim WD-52627 Owner's Manual

Front Control Panel
The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the
control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control
functions when the TV menus are displayed on the screen or when a special function has been activated. See
"Remote Control Overview" for further details on the functions of these buttons.
System Reset
If the TV does not respond to either the remote controi or the front panei controis and/or
does not power Off, press the SYSTEM RESET button with a pointed item like the end
point of a paperclip. The TV wiii turn Off and the TIMER light wiii flash quickly for about
one minute. When the TIMER light stops flashing, you may again turn on the TV. The
changes you made the last time the TV was on before you used the SYSTEM RESET
button may be lost; any changes that were previously saved are not lost, however.
A/V Reset
There may be times when you wish to reset the AiV (Audio and Video) settings back to the factory defaults. To
return all of the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the
defaults for individual devices, use the AiV Memory Reset selection on the Audio/Video menu.
Front-PaneJ indicator Lights
TV is powered OFR Normal operation.
off)
Green, steady TV is powered ON. Normal operation.
Green, rapid 1. TV just plugged into AC outlet. Wait until blinking stops before turning on
blinking (approximately 1 minute). Normal operation.
2. AC just restored after power failure. Wait until blinking stops before turning on
(approximately 1 minute). Normal operation.
3. TV Rebooting after System Reset Wait until blinking stops before turning on
used. (approximately 1-2 minutes). Normal operation.
4. TV Rebooting after power Wait until blinking stops before turning on
fluctuation or receiving abnormal (approximately 1 minute). Normal operation.
digital signals from digital channel,
CableCARD
TM,
or digital device.
5. You have begun the procedure to For detailed information, see the instructions
update software from an authorized that accompany the authorized software update.
flash memory device. Important: Do not use non-authorized software at
any time.
Green, slow TV powered off and automatic-on Normal operation. TV can be turned on at any
blinking timer is set. time.
2 Chapter 1, Television Overview