Replacement And Care Of Filters - Kenmore 758.299825C Operator's Manual

Repmacement and Care of Filter
WARNING: To reduce the risk of
shock or injury from moving parts,
always unplug humidifier before
removing or replacing any parts.
Grasp housing
assembmy
securemy and
miftoff
CAUTION: To help retard bacteria
growth and keep maximum efficiency,
the filter should be replaced at bast
once per season, or more often
under hard water conditions. Use
Kenmore 42-29950 recommended
replacement filter.
Replace the evaporative wicking filter at
bast once per humidification season or
more depending on water conditions in
your area.
Fimter Repmacement
1. Unplug humidifier. Before removing
the filter, we recommend moving the
humidifier to an area where floor
coverings are not susceptible to water
damage. (i.e. kitchen or bath areas.)
2. Remove the water bottle and set aside.
Be sure not to bump or damage the fill
valve.
3. Grasp the housing assembly and lift
straight up and away from the base
and set aside. The filter is now
accessible.
4. Take note of the filter position.
Remove the filter. You may want to
dean the base at this time. See the
"Cleaning and Maintenance" section of
this manua!.
5. Install a new filter (42-29950) into the
base. Coil the filter and position it
between the uprights in the bottom of
the base. The start and finish of the
coil should be captured at the centre
of the base (see diagram) and the
filter should be resting on the floor of
the base.
6. Return the housing assembly to the
top of the base. Reposition the
humidifier to its operating position.
7. The humidifier is now ready to be filled
for operation.
11
Position start
J and finish of
coiled filter at
centre of base
AHgn housing
assembly
bottom with
,, top of base
and reposition
securemy