Advertisement
\
Figure1. Unpaddnll
Rater to Figures 1-8,
DESCRIPTION
Sears Wood LatheStand is designedto
accommodateSears 15" Wood Lathe,
Model Number__21750.The standfea-
turas sturdysteel constructionandfbar
board shelf,Fastenersare providedfor
securinglathe to stand,She| is provided
for e=drastability and aco_sary storage,
Before stand is assembled,a suitable
locationshouldbe chosen.The lathe
and stand weigh appro=(imatsly 2 25 bs.
when completely assembled.They
shouldbe assembledon Iocatiee.
•
Lathe stand needs to be set on a
fist, level surface,
•
Good lightingand correct power
supply are also required for s proper
work area,
LEG SET ASSEMBLY
NOTE: Finger tightenbolts and nuts
until assemblyd stand is conlplate and
lathe is positionedon stand.Then tight-
en all fasteners securely,
Assemble the hesd_od( side W_J set:
•
Place oee of the legs marksd'A' on
floor.
•
Pce_ieetop inside leg so that slots
are aligned as indicated in Figure 2,
•
Attach top to leg at stcts usingthree
8-1.25 x 16rnm carriage bolts,8rnm
fist washers and 8,125ram hex nuts.
Rgure 2 -AttachTopto Leg'A'
•
Place shod brace inside leg and
attach usinghardware specified
above.Note that flange is located
towards the top,
Rguro 3 -Asmmble Shah Brace to leg
•
Positionleg 'B" outsidethe top and
shod brace. Attach as indicated in
Figure 4 usingfour bolts, washers
and nuts.
3
Advertisement
