Reference
Using the view operation together with standard OS commands enables you
to filter the path information listed for a specific CHA port. For details about
the view operation, see
We recommend that you use the following command and verify the
information on the target paths before you execute the offline operation to
place offline all the paths connected to a specific CHA port.
Example
The following example shows how to filter and display the information on
all the paths that pass through the CHA port 0A of the Hitachi AMS:
>dlnkmgr view -path -stname | find "AMS" | find "0A"
The above command will display information pertaining to only those
paths that pass through the specified CHA port.
online (Places Paths Online)
The dlnkmgr command's online operation places offline paths online. To
specify the paths to be placed online, specify a CHA port, single path, or HBA
port WWN.
Format
To place paths Online
dlnkmgr [-s host-name -u user-name -p password] online
[-path]
|-cha -pathid AutoPATH_ID
|-pathid AutoPATH_ID
|-hbaportwwn HBA-port-WWN]
[-s]
To Display the Format of the Online Operation
dlnkmgr [-s host-name -u user-name -p password] online
-help
Valid value
AutoPATH_ID
KAPL01001-I The HDLM command completed normally. Operation
name = offline, completion time = yyyy/mm/dd hh:mm:ss
>
view (Displays Information) on page
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
{ 000000 - 999999 }(Decimal)
6-22.
6-11