Hitachi XP P9500 User Manual page 154

Message ID
KAPL01142-W The parameter aa...aa cannot be
KAPL01143-W The host connection option
KAPL01146-I
KAPL01147-I
8-20
Message Text
specified if you omitted the host
connection option.
value cannot be specified.
Option = aa...aa
Because no path has been
selected among the currently
displayed paths, the paths in the
Offline(C) and Offline(E)
statuses will be changed to the
Online status. Is this OK?[y/n]:
aa...aa path(s) were successfully
placed bb...bb; cc...cc path(s)
were not. Number of target
paths = dd...dd, operation name
= ee...ee
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Details
aa...aa: Parameter that cannot be
specified
Action
Execute the operation-name -
help operation of the HDLM
command (dlnkmgr) to check the
format of the operation, and then
retry.
Details
aa...aa: Option for which an
option value cannot be specified
Action
Execute the help operation of the
HDLM command (dlnkmgr) to
check the host connection
options, and then retry. For
details on the help operation, see
help (Displays the Operation
Format) on page
Details
All the paths will be placed Online
because the path selection
parameter is not specified for the
online operation. To place all the
paths Online, enter y. To cancel
the operation, enter n.
Action
If you want to execute online
processing, enter y. If you want
to terminate processing, enter n.
Before you execute the
processing, be sure to execute the
view operation of the HDLM
command (dlnkmgr) to check the
path status. For details on the
view operation, see
(Displays Information) on page
6-22. For details on the online
operation, see
Paths Online) on page
Details
This message indicates the
number of the paths processed in
an online/offline operation.
aa...aa: Number of paths where
the online/offline operation
was successful(decimal (base-10)
number)
bb...bb: Online or Offline(C)
Messages
Explanation
6-5.
view
online (Places
6-11.