To Set The Path Statistics To 0; To Display The Format Of The Clear Operation - Hitachi XP P9500 User Manual

Operation
clear
help
offline
online
set
view
Notes:
¢
¢
¢
clear (Returns the Path Statistics to the Initial Value)
The dlnkmgr command's clear operation clears the statistics (I/O count and
I/O errors) of all paths that are managed by HDLM, and returns them to their
initial value.
Format

To set the path statistics to 0

dlnkmgr [-s host-name -u user-name -p password] clear
-pdst [-s]

To display the format of the clear operation

dlnkmgr [-s host-name -u user-name -p password] clear
-help
Table 6-1 Operations of the dlnkmgr Command
Initializes(0) the statistics (I/O count and I/O errors) of all paths
managed by the HDLM system. For details, see
Statistics to the Initial Value) on page
Displays the format of the operations used for HDLM. For details, see
help (Displays the Operation Format) on page
Places offline an online path or paths. For details, see
Paths Offline) on page
Places online an offline path or paths. For details, see
Paths Online) on page
Sets the HDLM operating environment. For details, see
Operating Environment) on page
Displays HDLM program information, path information, and LU
information. For details, see
Execute the HDLM command from the VMware vSphere CLI on the
remote management client.
To specify a value that contains a space in its parameter, enclose the
entire value in double quotes (").
If you perform either of the following operations, the length of time
required to perform the operation (number-of-paths x one second)
depends on the number of paths that are managed by HDLM:
• An online or offline operation to change the status of paths
• A set operation to change the load-balance settings
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Functions
6-3.
6-7.
6-11.
6-15.
view (Displays Information) on page
clear (Returns the Path
6-5.
offline (Places
online (Places
set (Sets Up the
6-22.
6-3