Hitachi XP P9500 User Manual page 62

monitoring
interval
If Hitachi Network Objectplaza Trace Library (HNTRLib2) is already installed,
the existing settings will be inherited. If you change these settings, keep in
mind that programs other than HDLM also use them. If an earlier Hitachi
Network Objectplaza Trace Library (HNTRLib) is already installed, the settings
will not be inherited.
To change the integrated trace file settings:
1 On the remote management client, double-click the following file in
.
Explorer:
program-installation-destination-drive:\Program Files
\HNTRLib2\bin\hntr2utl2.exe
#
The dialog box shown in
Utility 2 Release 2.0 Dialog Box. on page 3-14
2 In Number of Files, change the number of integrated trace files.
.
The default is 4. You can specify a value from 1 to 16.
3-14
Setting
Number of messages
to be output
For Windows 7 (x64) , Windows Server 2008, and Windows Vista
(x64), Program Files is Program Files (x86).
Figure 3-2 Hitachi Network Objectplaza Trace Utility 2 Release 2.0
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Default value
0
Figure 3-2 Hitachi Network Objectplaza Trace
Dialog Box.
Recommended
value
0
#
\HITACHI
appears.