Advertisement
• Us_ recommended accessodes (refer to page 17).
Use of improper accossodes may cause risk of
injury to persons.
•
Handle workpiece correctly. Protect hands from pos-
sible injury. ....
•
Turn machine off if it jams. Blade jams when it digs
too deeply into workpiece. (Motor force keeps it
stuck in the work.)
• Always keep drive, cutterhead and blade guards in
place and in proper operating condition.
•
Feed work into blade or cutter against direction of
rotation.
CAUTION:
Think safety! Safety is a combination of
operator common sense and alertness at all times
when tool is being used.
_-WARNING: Do not attempt to operate tool until it is
completely assembled according to the instructions.
Refer to Figure 1 below.
Check for shipping damage. If damage has occurred, a
claim must be filed with carder. Check for complete-
ness. Immediately report missing parts to dealer.
The jointer/planer is shipped complete in one carton
and includes steel legs. Additional parts which need to
be fastened to jointer/planer should be located and
accounted for before assembling.
NOTE: Although compact, the jointerlplaner is heavy. At
least two people are required to lift the tool.
A
Jointer Bed Assembly
B
Fence
C
Motor
D
Rear Guard
E
V-Belt
F
_ush S_
(2) _ _.
G
Top Panel
H
Stand Front Panel
I
Stand Rear Panel
J
Stiffners (2)
K
Lower Motor Bracket
L
Upper Motor Bracket
M
Vertical Motor Bracket
N
Knife Guard
O
Pulley Guard
P
Handwheel (2)
Q
Cover (2)
Hardware bag includes:
• Motor Pulley with Set Screws
•
Knife gauge (2)
•
Knife gauge rod (1)
•
Leveling feet (4)
•
3 CMI-10 Retaining ring (4)
•
#8 Serrated washer (2)
•
'/," Flat washer (6)
• 3Is"Lockwasher (3)
• "1=" Flat washer (34)
• %" Lockwasher (30)
,, #8-32 x % Pan head screw (2)
•
11, - 20 x 1/=Pan head screw (6)
•
%"-16 Hex nut (8)
•
s/16"-18 Hex nut (30)
• 3/r16 x 3/," Hex head bolt (3)
•
%-18 x 31,"Carriage bolt (30)
Rgure I - Unpacking
,
3
Advertisement
