Table of Contents
Advertisement
Wipe clean the external surface of the
machine, document feeder, document stack-
er, etc., with a dry cloth.
Never use benzene or thinner. These solvents
may damage or discolor the unit or parts.
G. FILLING-IN THE LABEL FOR RAPID KEYS
The telephone numbers of remote fax units that have been programmed as
speed numbers 01 to 12 in your unit can be called by pushing the correspond-
ing rapid key. A complete operation can also be selected and executed by us-
ing Program Keys Pl to P3. Write the remote party's name on the name label
and insert it above the corresponding row of keys whenever a number or pro-
gram is added or changed.
1. Take off the name label for the required
rapid key:
Push the left end of the label slightly with
a finger to raise the center of the label and
transparent cover. Hold these parts with
your hand so that the label can be easily
taken off.
2. Write the name on the label.
3. Replace the label and the transparent plate:
First insert the right side of the label, and
then insert the left side, curling the center
slightly.
When the label needs to be replaced, cut a piece of paper the same size as
l
the original label.
XIV USER MAINTENANCE
111
Advertisement
Table of Contents
