Time (Timer Transmission); G Setting Up A Timer Transmission; Transmission; Setting Up A Timer Transmission - Sharp AR-FX10 Operation Manual

Facsimile expansion kit for ar-c262m
Table of Contents

Advertisement

AUTOMATIC
SPECIFIED TIME (TIMER TRANSMISSION)
This feature enables you to set up a transmission or polling operation to be performed automatically at a specified
time up to a week in advance. This is convenient when you will be out of the office or for transmission at off-peak
nighttime rates. A combined total of 97 timer transmission and memory transmission jobs can be stored.
NOTES
G After a timer transmission is performed, the information (image, destination, etc.) is automatically cleared from
memory.
G To perform a timer transmission, the document must be scanned into memory. It is not possible to leave the
document in the document feeder tray or on the document glass and have it scanned at the specified time of

transmission.

G To set the date and time in the machine, refer to page 2-13 of "Operation manual (for general information and
copier operation))". You can check the machine's currently set time in the screen of steps 3 and 4 below.
G Only one polling timer operation can be set up at a time. If you wish to set up multiple timer polling operations,
combine the machines to be polled into a serial polling operation with a timer setting. (Refer to 3-5.)

SETTING UP A TIMER TRANSMISSION

1
In fax mode, touch the [SPECIAL MODES]
key.
AUTO RECEPTION
DIRE
SUB AD
SPECIAL MODES
ADDRESS
2
Touch the [TIMER] key.
SPECIAL MODES
TIMER
3
Select the day of the week. (Touch the
key or the
key until the desired day is
selected.)
IMER
DAY OF THE WEEK
NOTES
G Other operations can be performed after a timer transmission is set up. If another operation is in progress when
the specified time arrives, the timer transmission will begin when the job in progress is completed.
G If a timer transmission job is given priority in the fax job status screen (See "PRIORITY TRANSMISSION OF A STORED
JOB" on page 2-6.), the time setting will be cancelled and the job performed as soon as the current job is completed.
3-4
TRANSMISSION
DD
If the address directory
screen appears, touch the
[CONDITION SETTINGS]
key
to
display
the
condition settings screen
(page 1-5).
The timer transmission
screen appears.
The initial setting is "---"
(no selection). If you
select this setting, the
transmission
will
performed as soon as
the
specified
time
arrives.
4
Select the time. (Touch the
key until the desired time appears.)
TIME
00
HH.
The current time appears at the top of the screen.
If the time is not correct, press the [CA] key to stop
operation and adjust the date and time as
explained on page 2-13 of the "Operation manual
(for general information and copier operation)".
5
Touch the outer [OK] key.
CANCEL
00
mm.
Perform the desired transmission operation.
6
The steps that follow will depend on the type of
be
transmission. The following operations can be
performed in a timer transmission:
G Normal transmission (page 2-2)
G Broadcast transmission (page 3-2)
G Polling (page 3-5)
G Serial polling (page 3-5)
G F-code polling (page 4-5)
G F-code confidential transmission (page 4-6)
G F-code relay request transmission (page 4-8)
AT
key or the
Select
the
CANCEL
24-hour format.
Example:
00
11:00 P.M.
mm.
You will return to the
OK
screen of step 1 and a
timer transmission icon
OK
will appear next to the
[EXPOSURE] key.
To cancel timer, touch
the [CANCEL] key.
A
time
in
23:00

Advertisement

Table of Contents
loading

Table of Contents