6
Select the folder in which the still images are to be
saved.
7
Click the "OK" button.
• The still images on the media card are stored in the
selected folder on the computer.
8
Repeat steps 4 to 7 to capture other images.
CONTENTS
CONTENTS
Exitting
9
To quit SV Card Link, click
With SV Card Link, the connection settings are set automatically.
These settings can also be set manually.
1) Click
.
2) Set the serial port and transfer speed.
3) Click "OK".
G Do not disconnect connection cables or turn off the power of the
Note
VIEWCAM, computer or other connected equipment while image
data is being transferred with SV Card Link. Doing so could result
in loss of important data stored on the computer's hard disc.
7
PREVIOUS PAGE
NEXT PAGE
PREVIOUS PAGE
NEXT PAGE
.