Table of Contents
Advertisement
SV Card Link
SV Card Link
SV Card Link can be used to capture still pictures stored on a
VIEWCAM's media card directly into your computer.
This function can only be used if your VIEWCAM is equipped with
Note
a media card.
Preparations
1
Check that a media card is mounted in the VIEWCAM.
Connect the VIEWCAM to the computer.
• For details on connections, refer to the operation manual
of your VIEWCAM.
2
Turn on the VIEWCAM's power and set it to the VCR
mode.
Note
Do not turn off the VIEWCAM's power while SV Card Link is running.
Launching SV Card Link
3
Select the "Program" menu from "Start" on the task
bar, then click on "SV Card Link" in the "PixLab Lite"
folder, or double click the short-cut icon on the
desktop.
• SV Card Link is launched and data transfer with the
VIEWCAM starts. Once data transfer is completed, the
files on the media card are displayed as thumbnails.
CONTENTS
CONTENTS
SV Card Link cannot be launched while SV Photo Capture is
Note
running.
Capturing and saving images
4
Click on the thumbnail of the file to be loaded to select
it.
• Click successively on two thumbnails while pressing the
"Shift" key on the keyboard to select the thumbnails that
lie in the area of the two thumbnails you have clicked
on.
• Multiple thumbnails can be selected by clicking on the
thumbnails while pressing the "Ctrl" key on the keyboard.
5
Click
.
6
PREVIOUS PAGE
NEXT PAGE
PREVIOUS PAGE
NEXT PAGE
Advertisement
Table of Contents
