Table of Contents
Advertisement
S_6_i_ ...........................
i:;d_L:_"
i W/vll/Ivl
.
i JUMp
W/S_T t
rWVlr_K,
-°,--4
_ONY
If you have video equipment
other than Sony brand
(or if you have a
Sony; DVD/VCR
combination
unit) that you want to control with the
TV's remote control, use the following
procedure
to program
the
remote control.
'l
Turn to the list of "Manufacturer's
Codes" on page 25, and find
the three-digit
code number
for the manufacturer
of your
equipment.
(If more than one code number
is listed, use the
number
listed first.)
Press (Ol,I '-I).
_
Press the V('LA,VP7/ ii('/O/ or'-iq ¢/;;
button.
4
Using the ;>9buttons,
enter the three-digit
manufacturer's
code
number.
Press the/;i/if
button.
To check if the code number
works, aim the TV's remote control
at the equipment
and press the/:_ VvLbutton
that corresponds
with that equipment.
If it responds,
you are done. If not, try using
another code listed for that manufacturer.
_s
Notes
If more than one code number
is listed, try entering
them one by
one until you come to the correct code for your equipment.
If you enter a new code number, the code number
you previously
entered
at that setting is erased.
In some cases, you may not be able to operate
your equipment
with the supplied
remote control. In such cases, use the
equipment's
own remote control.
Whenever
you remove the batteries
to replace them, the code
numbers
may revert to the factory setting and must be
reprogrammed.
Advertisement
Table of Contents
