Table of Contents
Advertisement
VCR and Cable
Box
C
Your cable company
scrambles
some channels,
such as premium
channels
(which requires
you to use a cable box), but does not
scramble
all channels.
Use the TV remote control to change channels
coming through
the cable box. (You must first program
the remote control for
your specific cable box; see "Programming
the Remote Control"
on page 24.)
Use the TV remote control to change channels
coming directly
into the TV's VHF/UHF
jack. (The TV's tuner provides
a better
signal than the cable box.)
Record channels
coming through
the cable box and channels
coming directly
into the TV.
C
A splitter, which is a small, inexpensive
device that you can
purchase
at your local electronics
store.
Four coaxial cables.
Two A/V cables or two S VIDEO cable with audio cables.
_l
Connect the CATV cable to the single (input) jack of the splitter.
Use a coaxial cable to connect one of the splitter's
two output
jacks to the TV's VHF/UHF
jack.
Use a coaxial cable to connect the splitter's
other output
jack to
the cable box's input jack.
•
Use a coaxial cable to connect the cable box's output jack to the
VCR's RF input jack.
Use an A/V cable to connect the cable box's A/V output
jacks to
the TV's A/V input jacks.
Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
Run Auto Program,
as described
in "Setting Up the Channel List"
on page 20.
Advertisement
Table of Contents
