Table of Contents
Advertisement
Satellite
Receiver
_l
Connect the satellite antenna
cable to the satellite receiver's
satellite input jack.
Use an A/V cable to connect the satellite receiver's
A/V output
jacks to the TV's A/V input jacks.
Connect a CATV cable from your cable or antenna
to the TV's
CABLE jack.
4
Run Auto Program,
as described
in "Setting Up the Channel List"
on page 20.
-4
VHF/UHF
SATELLITE IN
Watch the satellite receiver
Press !"
repeatedly
to select the satellite receiver input
(VIDEO 1 in the illustration).
Set up the TV remote control to operate
the
If you have a non-Sony
satellite receiver, you must program
satellite receiver
the remote control. See "Programming
the Remote Control"
on pages 24-25.
S"
T
Ai?
_
Activate the TV remote control to operate
Pre_ s
_
,..... __ ,.
the satellite receiver
Control satellite receiver functions
with the
See
O_ eratu_g a Satelhte Receiver
on page 26.
TV remote control
Label video inputs to easily identify
See the instructions
for setting up Video Labels on page 45.
equipment
connected
to the TV
Advertisement
Table of Contents
