Table of Contents
Advertisement
•
y
Satellite
Receiver
and VCR
/b
_<sat÷ te _e ve_andVC_
1
Connect the CATV cable or Antenna
to the single (input) jack of
the splitter.
Use a coaxial cable to connect one of the splitter's
two output
jacks to the TV's VHF/UHF
jack.
Use a coaxial cable to connect the splitter's
other output
jack to
the satellite receiver's
VHF/UHF
input jack.
Connect the satellite antenna
cable to the satellite receiver's
satellite input jack.
Use a coaxial cable to connect the satellite receiver's
VHF/UHF
output jack to the VCR's VHF/UHF
input jack.
Use an A/V cable to connect the satellite receiver's
A/V output
jacks to the TV's A/V input jacks.
?
Use an A/V cable to connect the VCR's A/V output jacks to the
TV's A/V input jacks.
Run Auto Program,
as described
in "Setting Up the Channel List"
on page 20.
SATELUTEI_
£_/cabie
Advertisement
Table of Contents
