Removing
steps:
1. Press the
ON LINE
CAUTION: Never insert or remove
printer is on line.
2. Hold the edges of the cartridge and slowly pull it from the slot.
3. Press
the ON LINE
Reset
In HP emulation mode, you can reset
three ways:
By turning
l
By holding down
l
the printer off line)
(with
By sending the ESC E command.
l
The result varies depending upon
in the table on
a font cartridge—To remove a font cartridge, follow these
button to set the printer off line.
button to set the printer on line.
power off and then back on
the
the CONTINUE/RESET
next page.
the
cartridge while the
the
printer in the following
the
button for three seconds
method you use, as shown
which
Printer Modes 5-5
HP Emulation