Epson Action Laser Action Laser User Manual page 162

Error Messages
TONER EMPTY
The developer unit may not be installed properly. Open
and make sure the developer unit is seated properly in the basket.
If message remains, the toner is low and you must replace
the
toner cartridge. See the section on replacing the toner cartridge in
Chapter 6.
CPU ERROR
ERROR 10
ERROR 11
ERROR 12
If one of these error messages appears, follow
Press the
1. CONTINUE/RESET
2. If the error does not clear, turn the printer off for at least five
seconds. Then turn it back on.
3. If problem remains, service is required. Call 1-800-922-891 1
the
for the location of the nearest Epson Customer Care Center.
Troubleshooting
7-6
ERROR 30
ERROR 31
ERROR 32
ERROR 33
button.
printer
the
steps below.
the
the