Performing The Self Test - Epson Action Laser Action Laser User Manual

8. If you are not using letter size paper (the factory default setting
for your printer), see the section on SelecType in Chapter 3 for
details on setting the correct paper size.

Performing the self test

Successful completion of the self test indicates that you have set up
your printer correctly and
to your computer. If you are unable to print this test, see Chapter 7
for troubleshooting information.
The self test also lets you check your print density setting. After you
print self test, check the character pattern to see whether you are
the
satisfied with the print density. The section in
adjusting print density describes how to
setting.
Follow steps below to perform the self test:
the
CAUTION: Never open
printing.
1. Be sure that your printer is plugged in and the power is on
before performing the self test.
2. Be sure that your printer is off line.
display.) If not, press the
line.
Press the
3. MANUAL
the same time.
you are ready to connect the printer
that
the
ON LINE
and buttons
SPECIAL
Testing and Connecting Your Printer
chapter on
this
the print density
change
cover while the printer is
appears on your
(OFF LINE
button to set the printer off
your control panel at
on
Testing the Printer
2-5