Epson Action Laser Action Laser User Manual page 75

COPIES = 01*
You can change the setting to print between one and 99 copies of
page.
each
AUTO CONT = ON*
When this option (automatic continue) is on, your printer
automatically continues printing after a 10 second pause when one
of the following errors occurs: paper size, error 20 (memory
overflow), error 21 (page too complex), error 22 (communication
error), and error 40 (parity/baud rate error>. When this option is off,
you must press the
Chapter 7 for details on error messages.
EMULATION = HPLJ2*
This option allows you to enter the HP emulation submenu
(described in
the
Identity Cartridge is installed, the printer also shows FX as an
option. (The SelecType options for the FX cartridge are described in
the manual
that
I/F = PARALLEL*
This option selects the printer interface. When
set, this option is used to enter the interface submenu (described
later).
CONTINUE/RESET
following section). When an optional Epson FX
comes with the option.)
01 through 99
ON*
OFF
button to continue printing. See
HPLJ2*
PARALLEL*
SERIAL
the
Using the Printer
SelecType Options
serial interface is
3-21