Keyboard Problems - Epson EQUITY 3865X/20 PLUS User Manual

5. Remove the Reference diskette, turn off the computer, and
follow the instructions under "Changing the Jumper
Settings" in Chapter 6 to enable the password function
(jumper J3).
6. If you do not have a hard disk, insert the MS-DOS Startup
diskette in drive A. Turn on the computer. You see the key
prompt (h ). If you enabled network server mode, you do
not see the key prompt. Enter your new password to access
the system. (See "Using the Power-on Password" in
Chapter 3 or "Using a Password in Network Server Mode"
in Chapter 4.)
Note
Be sure to remember your new password or write it down and
keep it in a safe place. If you forget the password you enter
now, you may have to repeat the procedure above the next
time you turn on your computer.

Keyboard Problems

If you are having trouble with the keyboard, check the
following:
1. If the screen displays one of the following keyboard errors
when you turn on or reset the computer, make sure the
keyboard is securely connected to the keyboard socket on
the back of the computer:
Troubleshooting
A-12
Keyboard or system unit error
Keyboard or system unit error.