Moving The Cursor Block - Epson EQUITY 3865X/20 PLUS User Manual

2. Be sure
changes the setting that caused the error to a setting that is
more likely to match your configuration. The screen displays
the main Setup menu:
Processor speed
Keyboard / Sound
Real-time clock
Hard disk drive
Diskette drive
Serial/Parallel
You should check all the settings in the Setup program to
make sure they are correct for your system. The default value
for the setting that caused the error may not be the correct
one for your configuration.
Note
If you choose
default value, the Setup program does not change the setting
that caused the error and the screen displays the main Setup
menu. Be sure to correct this setting before you exit Setup.

Moving the Cursor Block

Use -L and T to move the cursor block (the highlighted bar)
through the options on the main Setup menu. After you
highlight the option you want, press Enter to select it.
Y
is highlighted and press Enter. The Setup program
Exit
Display
Password
Cache memory
N
or press
E
SC
instead of selecting
Running the Setup Program
Y
to set a
2-5