Keyboard Problems - Epson Equity IIe User Manual

Follow the instructions in "Changing Jumper Settings"
in Chapter 5 to enable the password function by setting
jumper J1 to position A.
Insert your Reference diskette in drive A and turn on
the computer. When the screen displays the Operation
Menu, highlight
Follow the instructions in "Setting the Power-on
Password" in Chapter 2 to enter a new power-on
password.
Note
If you know the power-cm password but you want to
or delete
it, see

Keyboard Problems

If you are having trouble with the keyboard, check the
following:
1. If the screen displays a keyboard error when you turn on or
reset the computer, make sure the keyboard is securely
connected to the computer. See "Connecting the
Keyboard" in Chapter 1 for instructions.
2. If nothing happens when you type on the keyboard, see
"The Computer Locks Up," earlier in this appendix.
3. If the cursor keys do not work properly, the Num Lock
function may be on. When Num Lock is on, the numeric/
arrow keys on the numeric keypad work only as numbers.
Check if the
of the keyboard is lit; if it is, press the
turn off the function.
and press
Setup
Chapter 3 for instructions.
indicator in the upper right corner
Num Lock
Enter.
change
key to
Num Lock
Troubleshooting A-5