Introduction; Scanning Sequence Examples; Errors While Scanning; Miscellaneous Default Parameters - Motorola SYMBOL LS9203 Reference Manual

Introduction

This chapter includes commonly used bar codes to customize how your data is transmitted to your host device. In addition to these
bar codes for data formatting, refer to each host chapter for the appropriate host connections and host device features for your
scanner. Refer to Chapter 9, Symbologies
to your host device.
Before programming, follow the instructions in
Your scanner is shipped with the settings shown in the
A, Standard Default Parameters
programming may not be necessary. Features values are set by scanning single bar codes or short bar code sequences.

Scanning Sequence Examples

In most cases you need only scan one bar code to set a specific parameter value.
Parameters, such as Prefix Value, require that you scan several bar codes in the proper sequence. Refer to each individual parameter
for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if you make an error during a scanning sequence, just re-scan the correct parameter.

Miscellaneous Default Parameters

Table 10-1 lists the defaults for miscellaneous scanner options parameters. If you wish to change any option, scan the appropriate
bar code(s) provided in the Miscellaneous Scanner Parameters section beginning on page 10-4.
See Chapter A, Standard Default Parameters

miscellaneous default parameters.

Note
Transmit Code ID Character
Suffix Value (Value 1)
Prefix Value (Value 2)
FN1 Substitution Values
Scan Data Transmission Format
Transmit "No Read" Message
Report Version
and the Advanced Data Formatting Programmer Guide for customizing data for transmission
Chapter 1, Getting
Miscellaneous Scanner Options Default Table on page 10-3
for all host device and miscellaneous scanner defaults). If the default values suit your requirements,
for all user preferences, hosts, symbologies, and
Table 10-1. Miscellaneous Scanner Options Default Table
Parameter
Started.
Default
Disable
<CR><LF>
None
7013
Data as is
Disable
Miscellaneous Scanner Options 10-3
(also see Chapter
Page Number
10-4
10-6
10-6
10-9
10-10
10-14
10-15