Set Lengths For Msi - Motorola SYMBOL LS9203 Reference Manual

Set Lengths for MSI

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Lengths for MSI may be set for any length, one or two discrete lengths, or lengths within a specific range.
When setting lengths for different bar code types by scanning single digit numbers, single digit numbers
must always be preceded by a leading zero.
Note
One Discrete Length - This option allows the scanner to decode only those MSI symbols containing a selected length. Lengths are
selected from the numeric bar codes beginning on page
symbols with 14 characters, scan MSI - One Discrete Length, then scan 1 followed by 4. If an error is made or to change a
selection, scan Cancel on page D-8.
Two Discrete Lengths - This option allows the scanner to decode only those MSI symbols containing either of two selected
lengths. Lengths are selected from the numeric bar codes beginning on page
decode only those MSI symbols containing either 2 or 14 characters, select MSI - Two Discrete Lengths, then scan 0, 2, 1, and
then 4. If an error is made or to change a selection, scan Cancel on page D-8.
D-1 in Appendix D, Numeric Bar
MSI - One Discrete Length
D-1 in
MSI - Two Discrete Lengths
Codes. For example, to decode only MSI
Appendix D, Numeric Bar Codes. For example, to
Symbologies 9-87