Table of Contents
Advertisement
To alter these settings please proceed as follows:-
Press the
Use PLUS
SeT button
and
until SeT
MINUS
indicator is
buttons
next to HW
to adjust
or CH PrOg
day
position
repeat this
process for
2nd and 3rd
settings
Use the PLUS and MINUS buttons to
select day required and press COPy.
1
'IN' is displayed to confirm the copy.
repeat for other days as required
Press eNTer. Use the plus and minus
buttons to select the day required
2
and press eNTer. Set 1st, 2nd and
3rd times as before. To repeat for
other days go to 2, to copy go to 1
deFaULT TIMe SeTTINgS
1st ON
1st OFF
6.30AM
8.30AM
The default time settings shown above are preset at the factory
NB. The factory default settings for the 2nd ON/OFF times are both set at 12:00pm
(midday) which cancels this 'ON' period giving 2 ON/OFF periods for the day. If a midday
'ON' period is required set the 2nd ON and OFF times accordingly. If not press ENTER twice.
6
Setting the On and Off Times
Press
eNTer
enter the 3rd
OFF time and
the word COPy
is displayed
To set independent
times for other
days go to 2
2nd ON
2nd OFF
12.00PM
12.00PM
Use PLUS
and
MINUS
Press
buttons
eNTer
to adjust
1st ON
time
To follow the copy
route and repeat all
programmed times for
another day go to 1
To transfer to independent times
for other days go to 2 or to finish
programming press the SeT button
until the SeT indicator is in the rUN
position
To finish programming press the SeT
button until the SeT indicator is in
the rUN position
3rd ON
3rd OFF
4.30PM
10.30PM
Use PLUS
and
MINUS
buttons
to adjust
1st OFF
time
Press
eNTer
Hide quick links:
Advertisement
Table of Contents
